Office Error : OUTLOOK can't open message caused an invalid page fault in module OUTLLIB.DLL at

Q: Office Error : OUTLOOK can't open message caused an invalid page fault in module OUTLLIB.DLL at <memory address>

1. Reset the Outlook toolbar template. With Outlook close, do a search for and rename outcmd.dat file. Do the same for frmcache.dat and outlprnt files. Restart Outlook.

The dat files are located in C:\Documents and Settings\<user>\Application Data\Microsoft\Outlook folder. It is a hidden file, so you have to unhide hidden files. Go to any folder and select Tools > Folders Options > View. Check "Show hidden files and folders". Click OK.

2. If no joy, register two important Outlook files. Go to Start > Run and type regsvr32 OLE32.DLL

Do the same for INETCOMM.DLL

3. If no joy, an addin could be interfering. Disable Outlook Addins.  Go to Tools > Options > Other > Advanced Options > Addin Manager or COMM/Addins and disable the addins.

4. Check if an external program running in the background is interfering with Outlook. Check Firewall, antivirus, antispyware, antispam, and all Norton programs. Disable these programs one at a time.

5. If no joy, create a new Outlook profile.

http://www.outlook-tips.net/howto/profile.htm

6. Repair Outlook. With Outlook open, go to Help > Detect and Repair.

7. If no joy, reinstall Outlook.  Go to Add/Remove Programs and highlight Microsoft Office. Click on Install/Uninstall.  A menu will pop allowing you to choose repair or reinstall

XP Error : WMS Idle Please Wait

Q:แก้ปัญหาว่า ตอนปิดทำไมต้องมี​ Ending Program - WMS Idle Please Wait ​

A: สาเหตุมาจาก โปรแกรม Nero smart scout runs as a background process อยู่ เวลาเรา shutdown windows โปรแกรมตัวนี้ ไม่ยังไม่เลยทำงาน จึงขึ้น Error ครับ

วิธีแก้ ก็เอาออกจาก startup โดย

run msconfig  ไปที่ Startup uncheck  BgMonitor..... ออก แล้ว restart ครับ

OFFICE Error: Outlook when send mail show error interface not registered

Q: เวลาจะส่งเมล์ใน Outlook  แล้วไม่ส่งได้ แต่ขึ้น Error Message Box : outlook error interface not registered

A: ปัญหาก็คือ ตัว OLE32 ไม่ได้ Register เราก็แก้ไขได้ง่ายๆ โดยทำการ Register มัน โดยเปิด Windows Run Command

" Regsvr32.exe %windir%\System32\Ole32.dll "

SERVER : ADDING WIN 2003 R2 TO 2000 DOMAIN

กรณีศึกษา คาดว่า จะเจออีกหลายที่ครับ

วัตถุประสงค์ ย้าย domain controller dns/dhcp/file share มายังเครื่องใหม่ ที่ run win2kk3r2

ต้องการ add win2k3 เข้าไปใน domain 2000 ที่มี schema ต่างกัน

SERVER 1 2000 DOMAIN CONTROLLER (DNS/DHCP/FILESHARE PRINTSERVER)

SERVER 2 2000 DOMAIN CONTROLLER SECONDARY

SERVER E EXCHANGE SERVER ถอนออกไปแล้ว

ADDING SERVER 3 WIN2K3R2 DOMAIN CONTROLLER ไปยัง domain ปรากฏมี error ad schema ต่างกัน

1. Run adprep.exe from wink3 cd directory i386  /forestprep   +  / domainprep  ไม่สามารถทำงานได้  Schema exchange 2000 ค้างอยู่

2. ใช้ แผ่น exchange 2003 run setup/ forestprep และ /domainprep ที่ server 1

3. ใช้ แผ่น win2kr2 run setup/ forestprep และ /domainprep ที่ server 1 และ server 2

4. ยังไม่สามารถ add server 3 เข้า domain ได้ เพราะ schema ต่าง version

5. ต้องใช้ แผ่น win2kr2 ที่ สอง components disk/adprep run adprep.exe /forestprep  + /domainprep

6. กลับไปยัง server 3 อีกที run dcpromo

ทุกอย่างผ่าน  สามารถ add server  2003r2 เข้า domain 2000 ได้

***2003 /2003r1/2003r2 ทำต่างกัน เพราะ ad version ไม่เหมือนกัน

ขั้นตอนที่  2 อาจจะไม่ใช้ แผ่น exchange 2003 ก็ได้ แต่ ต้อง ทำ script ขึ้นมาเองตาม ตัวอย่าง ms script

XP Error : The memory could not be read.

Q: When I start up the computer I get a svchost.exe app error. The instruction at 0x745f2780 referenced memory at 0x00000000. The memory could not be read.

A: First: If the error is still present, DO NOT CLEAR IT. Leave the error on screen.

Error message:

svchost.exe -- application error the instruction at "0x745f2780" reference memory at "0x00000000". the memory could not be 'read'

Event log yielded the following:

Faulting application svchost.exe, version 5.1.2600.2180, faulting module msi.dll, version 3.1.4000.2435, fault address 0x00012780.

Repair Steps:

1. Verify Windows Update and BITS Service settings:

a. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

b. Double click the service "Automatic Updates".

c. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

d. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

e. Click on the tab "General "; make sure the "Startup Type" is "Automatic". Then please click the button "Start" under "Service Status" to start the service.

f. Repeat the above steps with the other service: Background Intelligent Transfer Service (BITS) 2. Re-Register the Windows Update DLLs a. Click on Start and then click Run, type: cmd and click OK.

b. In the command window type "REGSVR32 WUAPI.DLL" (without quotation marks) and press Enter.

When you receive the "DllRegisterServer in WUAPI.DLL succeeded" message, click OK.

c. Please repeat these steps for each of the following commands:

REGSVR32 WUAUENG.DLL

REGSVR32 WUAUENG1.DLL

REGSVR32 ATL.DLL

REGSVR32 WUCLTUI.DLL

REGSVR32 WUPS.DLL

REGSVR32 WUPS2.DLL

REGSVR32 WUWEB.DLL

d. Next stop the windows update Service by typing: “net stop WuAuServ”

3. Rename the Windows Update folder:

a. Click Start, Run, type: %windir% and press Enter.

In the opened folder, rename the folder SoftwareDistribution to SD_Old.

4. Restart the Windows Update Service.

a. Click Start, Run, net start WuAuServ.

Reboot system

Office Error: when open word 'Compile error in hidden module Autoexec'

Q: Whenever I open or close Outlook, Word or Excel I get an error message headed Microsoft Visual Basic, which vanishes when I click OK and I can then use the the programs normally. If it’s Word or Outlook, the error is 'Compile error in hidden module Autoexec’; if it’s Excel, it’s 'Compile error in hidden module Autoexecnew’ when it opens, and 'Compile error in hidden module DistMon’ when it closes. I’m running Windows XP Home. What’s causing this error message?

A:The problem is linked to a corrupt or outdated add-in that’s starting with Microsoft Office. The Microsoft Knowledgebase has one particular reference at http://support.microsoft.com/?kbid=307410, but this assumes you have both Norton AntiVirus installed and an outdated Adobe Acrobat add-in (PDFMaker), which may not be the case.

What you should do is browse to the Program Files\Microsoft Office\Office\Startup folder (Office10\Startup in Office XP) and see what’s inside it. Move any files you find to another folder and then restart Office - the error messages should vanish.

It’s then a case of identifying the files you found - maybe even putting them back one by one and restarting Office until the error message returns - and then doing a Google search for that filename to find out more about it. You can then take appropriate action: either dump the file altogether or go looking for an updated version that won’t cause problems.

Symantec Error: "S32evnt1.dll. An installable Virtual Device Driver failed DLL initialization"

Error: "S32evnt1.dll. An installable Virtual Device Driver failed DLL initialization"

Situation:

สถานที่ : Conrad 

สาเหตุ เนื่องมาจาก update Symantec Antivirus form version 8 to version 10.1

Computer workstratoin เมื่อดับเบิ้ลคลิ๊ก short cut Fidelio Program จะ pop up error :

"c:\Program Files\Symantec\ S32evnt1.dll. An installable Virtual Device Driver failed DLL initialization."

เมื่อเลือก Ignore  2 ครั้ง ก็จะเข้าโปรแกรมได้ แต่สีจะเพี้ยน

Solution:

To fix the problem, edit the registry and restart the computer. Then update the Symevent files and restart the

computer again.

Follow the directions for your version of Windows:

To edit the Windows XP registry

1. On the Windows taskbar, click Start > Run.

2. In the Run dialog box, type regedit

3. Click OK.

4. Go to the following key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\VirtualDeviceDrivers

5. In the right pane, delete the VDD value.

6. In the left pane, right-click the VirtualDeviceDrivers key, and then click New > Multi-String Value.

7. Type VDD for the name of the new value.

8. Exit the Registry Editor.

9. Restart the computer.

To edit the Windows 2000 registry

1. On the Windows taskbar, click Start > Run.

2. In the Run dialog box, type regedt32

3. Click OK.

4. Go to the following key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\VirtualDeviceDrivers

5. In the right pane, delete the VDD value.

6. On the Edit menu, click Add Value.

7. In the Value Name box, type VDD.

8. In the Data Type drop-down menu, click REG_MULTI_SZ, and then click OK.

9. Exit the Registry Editor.

10. Restart the computer.

To update the Symevent files

1. Download Sevinst.exe from the Symantec FTP site. Save the file to a folder on the hard drive (for example, C:

\Windows\Temp).

2. Open a command prompt, and change to the folder where you downloaded the Sevinst.exe file.

3. Depending on the program version, do one of the following:

l On computers that run Symantec AntiVirus 9.x or later, type the following command:

sevinst.exe SAVCE

l On computers that run Symantec AntiVirus 8.x or earlier, type the following command:

sevinst.exe NAVNT

4. Restart the computer.