How to reset Switching HP 1700 to factory default?
Forgotten the IP Address or Password or Reset to factory default
If you have forgotten the switch's IP address or administration password you
can return the switch to its factory default state by doing the following:
can return the switch to its factory default state by doing the following:
- Remove the power cord switch power off.
- Remove all cables from the front-panel ports.
- Connect port 1 to port 2 on the front panel, using a utp cable standard.
- Reconnect the power cord to power on switch.
- Wait at least 40 seconds for boot complete.
- disconnecting port 1 from port 2.
- Remove the power cord switch power off.
- econnect the power cord to power on switch.
will be returned to the default 192.168.2.10, and all configuration settings will
be returned to factory defaults